Reliefi PLA
50,00 ₾ – 70,00 ₾
QIDI ASA-Aero is a type of lightweight 3D printing filament, specifically developed for the fields of aircraft models, ship models, drones, etc. ASA-Aero controls the foaming ratio of the material by adjusting the nozzle temperature during the printing process so that the density of the material extruded by the nozzle can be adjusted within a certain range. With this technique, it is easy to reduce the weight of the model. In the best-case scenario, the model weight can be reduced to 50% of a model printed with ordinary ASA. In addition to that, the matte texture of the printed surface can reduce the visibility of printed layers and thus give a smooth surface finish.
- On-Demand foaming technology QIDI ASA-Aero is a type of ASA filament that will start foaming with the aid of a blowing agent during the printing process. The blowing agent is in an unexcited state in the ASA filament before printing, During the printing process，by adjusting the printing temperature, the foaming ratio of the blowing agent can be easily controlled. The maximum foaming ratio can reach 250%.
- Meanwhile, QIDI ASA-Aero retains the original UV aging resistance and high heat resistance of ASA material, which is suitable for long-term use in high-temperature outdoor environments.
| Recommended Nozzle Diameter | ≥0.4 mm |
| Print speed | 30-90 mm/s |
| Recommended build surface treatment | PEI Film |
| Build plate temperature | 80-110°C |
| Raft separation distance | 0.18-0.2 mm |
| Cooling fan speed | 0%-50% |
| Retraction distance | NO |
| Retraction speed | / |
| Recommended Support Material | / |
| Additional Suggestions： | |
| 1.Since ASA-Aero adops the ‘on-demand foaming’ technology, the filament will continue to expand in the nozzle after being heated during the printing process. Therefore, it will cause unavoidable stringing during the nozzle movement. Even adjusting the retraction setting in the slicing software cannot solve this problem. Based on the above, it is recommended to turn off the retraction setting. | |
| 2.Because ASA materials have a high glass transition temperature, a certain ambient temperature（40-70°C） is required during printing to release the internal stress of the printed parts and reduce warping. When printing thin-walled models without any form of insulation, it is recommended to use nozzles with a diameter of 0.6mm or more to ensure the strength of printed parts and reduce shrinkage. | |
| 3.When printing with ASA-Aero filaments, please place the enclosed printer in a ventilated environment. | |
PA12-CF
-
Product Features
- Superior Strength and Stiffness
- Toughness & Vibration Resistance
- Exceptional Thermal Resistance
- Comes with High Temperature Spool
- Diameter: 1.75mm +/- 0.02mm
- 0.2 mm Nozzle Not Compatible
- Brass/Copper plated Nozzle Not Recommended
- Dry before Use
- Enclosed Printer Required
PET-GF
- Very Low Moisture Absorption
- Exceptional Mechanical Properties
- High Dimensional Stability
- Exceptional Thermal Resistance
- Comes with High Temperature Spool
- Diameter: 1.75mm +/- 0.02mm
- 0.2 mm Nozzle Not Compatible
- Brass/Copper plated Nozzle Not Recommended
- Dry before Use
- Enclosed printer (Recommended)
PLA Rapido Metal
- Tough and Durable
- No-paint Metallic Texture
- No Metal particle infill
- Easy to Print & Beginner Friendly
- Closed chamber not recommend
1. Reduce print speed: PLA Metal is more viscous than regular PLA. Lower print speeds are recommended to minimize pulling and improve surface smoothness. 2. Use proper substrate adhesion: PLA Metal may be more prone to warping in some cases, so make sure that the print bed is clean and that proper adhesion measures are used (PEI sheet or glue, etc.). 3. Do not print too large overhangs: PLA Metal has a higher fluidity at high temperatures, so when printing overhangs, the material does not easily hold its shape in the air. For more details please refer to: Filament Guide on WIKI.
PLA Wood (Rapido)
- Matte Texture
- Wood-like effect
- Easy to Print & Beginner Friendly
- Diameter: 1.75mm +/- 0.02mm
- Chamber enclosed not recommend
With the addition of natural wood powder, PLA Wood exhibits the following distinct characteristics compared to regular PLA.
1. Higher Moisture Absorption: PLA Wood contains natural wood powder, making it more sensitive to moisture. Dry before use to ensure the best print quality and consistent finish. •Storage and Drying: Although PLA Wood is thoroughly dried and vacuum-sealed prior to shipping, variations in transport conditions may affect its moisture level. We strongly recommend drying it right after opening and storing it in a sealed container with desiccant. Repeat drying and moisture-proofing before each long-term storage period. •Drying Guidelines: For best results, dry at 55 ± 5°C for 8 hours in a blast drying oven.
2. Color Variation: Natural wood powder may result in slight color variations depending on the drying level and raw material differences.
3.Wood-like smell: During printing, PLA Wood emits a mild, natural wood scent due to the wood powder content. It is non-irritating and non-toxic. For more details please refer to: Filament Guide on WIKI.
QIDI PPS-CF 0,75kg
- Heat Resistance Up to 264℃
- Excellent Flame-resistant
- Top-tier Mechanical Properties
- Solvent and Chemical Resistance
- Ultra-Low Water Absorption
- 0.2 mm Nozzle Not Compatible
- Stainless Steel Nozzle Not Recommended
- Must Be Dried before Use to Achieve Optimal Print Quality
PPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide (PPS). The combination of PPS resin with carbon fiber imparts excellent properties to PPS-CF, including outstanding solvent resistance, corrosion resistance, heat resistance, and flame retardancy. Additionally, higher printing temperatures enhance the strength, rigidity, and dimensional stability of PPS-CF. When paired with the QIDI Plus4, it becomes a specialty engineering plastic capable of meeting the demands of unique and challenging applications.
PPS-CF exhibits excellent solvent and chemical resistance. At temperatures below 200°C, it is virtually insoluble in any solvent and demonstrates outstanding resistance to acids, alkalis, and salts under normal conditions. This makes PPS-CF an ideal choice for demanding environments where high chemical stability is essential.
ePLA-Matte Dual
-
Description
ePLA-Matte Dual is an excellent printing material that stands out for its matte surface. This material has a unique two-color design, showing a sense of color layering, making the model textured and clear. Its delicate surface and no obvious layer pattern provide a high-level touch and visual quality for the printed parts. Compared with ABS, ePLA-Matte is more convenient to use, the closed cavity is not needed for the printing. It has a lower shrinkage rate, hard to warping or cracking, making it an ideal choice for printing large-scale models. In addition, the support structure of ePLA-Matte can be removed easily from the surface and leave a smooth and flat surface. It has high strength, and the filament is not easy to break, ensure the continuity and stability of long-term printing without nozzle clogging. These characteristics make ePLA-Matte Dual very suitable for the verification of early concept models and making rapid prototypes.Sellingpoint
Two-colored filament Environmentally friendly High cost efficient Fast printingEasy to peel off the support Excellent printability Filament is not easy to break Matte surface
ePLA-Silk Mystic
QIDI Q1 PRO
ePLA-HS
-
Description
The excellent weather resistance and mechanical properties make asa filament more resistant to the effects of environmental aging. The asa 3d printer filament is widely used in outdoor applications.Sellingpoint
Weather resistance High toughnessHigh rigidity High impact resistance
Qidi TPU95A-HF
Qidi UltraPA Nylon Filament (PPA)
-
Description
Development based on nylon 6/66 copolymer; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance, with an elongation at break of up to 175%, which can print strong and durable parts with high fracture resistance; Low shrinkage, not easy to warp and crack when printing.Sellingpoint
High toughness High impact resistanceSelf-lubricating wear-resisting Excellent printability
Product categories
Filter by price
Filter by Color
- Black (31)
- Red (9)
- Yellow (10)
- Army Green (1)
- Ash Grey (1)
- Beige (1)
- BLACK&WHITE (1)
- Blue (11)
- BLUE ORANGE GREEN (1)
- Bone White (1)
- Bronze (3)
- Brown (4)
- Cedar Brown (1)
- Clear (2)
- Clear Blue (1)
- Clear Green (1)
- Clear Red (1)
- Coffee (1)
- Coffee Gold (1)
- Cold White (2)
- Cooper (1)
- CYAN (2)
- Dark Blue (2)
- Fire Engine Red (3)
- Gold (4)
- GOLD GREEN PURPLE (1)
- Green (11)
- Grey (13)
- Kraft (1)
- Lake Blue (1)
- Lemon Yellow (1)
- Light Blue (2)
- Light Brown (1)
- Light Green (1)
- LIME (1)
- Magenta (1)
- Malt Clay (1)
- Marble (1)
- Metal Blue (1)
- Metal Coffee Gold (1)
- Midnight Green (1)
- Multicolor Rainbow (2)
- Mustard Green (1)
- Natural (11)
- Navy Blue (1)
- Olive Green (2)
- Orange (7)
- Peak Green (1)
- Pearl White (1)
- Pine Green (1)
- Pink (5)
- Purple (4)
- Rainbow (3)
- RED GOLD PURPLE (1)
- RED YELLOW BLUE (1)
- RED&BLACK (1)
- Red-Orange (1)
- Rose Gold (1)
- Rose Red (1)
- Silver (8)
- Skin (3)
- Sky Blue (1)
- Solid black (1)
- Solid Blue (1)
- Solid Gold (1)
- Solid Green (1)
- Solid Red (1)
- Solid Silver (1)
- Solid White (1)
- Solid Yellow (1)
- Tech Grey (1)
- Transparent Blue (2)
- Transparent Green (2)
- Transparent Orange (2)
- Transparent Pink (1)
- Transparent Purple (1)
- Transparent Red (2)
- Transparent Violet (1)
- Transparent Yellow (1)
- Very Peri (1)
- Violet (3)
- Warm Grey (2)
- Watermelon Red (1)
- White (14)
- Wood (1)
Store Information
+995 555 271 261
მისამართი: 34 Pekini ave, Tbilisi, Georgia
სამუშაო საათები:
ორშაბათი-შაბათი : 11:00 – 19:00
კვირა – დაკეტილია
Store Location
Copyright 2023 © INTO.GE
