-
Description
Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.Sellingpoint
Matte surface effect Skin-friendly feel Flexible and soft Sturdy and durableHigh elasticity High tenacity High impact resistance
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
100ml
Add to cart
Add to Wishlist
Add to Wishlist
-
Description
A portable household vacuum device for vacuum storage of consumables, especially consumables with high water absorption. When your consumables are opened and not used up, to prevent the material from getting wet and affecting the print quality, you can use this kit to store your materials. The vacuum kit can be used in conjunction with eBOX to achieve the best printing results for consumables. The kit has certified by BPA-FREE and FDA.The eVacuum kit is made by food-grade materials, which makes it safe and environmentally friendly.Sellingpoint
Good sealing Wide compatibilityFood grade materialProduct Advantages
1. The vacuum bag adopts double seal design, single-sided embossing treatment, good sealing performance, can achieve the best moisture-proof effect, and saves time and effort when pumping air 2. The vacuum bag is made of BPA-FREE and FDA-certified food-grade PE+PA composite material, strong and durable, recyclable, safe and environmentally friendly 3. The vacuum bag is specially designed for 3D printing filament, which can be adapted to 0.5KG/0.75KG/1KG package of 1.75mm/2.85mm/3mm filaments 4. The humidity card has high sensitivity and can be used repeatedly, so you can know the dry and humidity of filaments at any time
Add to Wishlist
Add to Wishlist
-
Description
Double-sided hollow design makes it easy to dry, cost-saving for production and transport, reduce carbon emissions.eSUN 3D printer filament spool uses biodegradable and environmentally friendly packaging bags.Sellingpoint
Real-time observation High strength and toughness Environmental friendlyCan be dried at high temperature Biodegradable green environmental protection packaging bag
Add to Wishlist
Add to Wishlist
-
Description
Large size 65*76*72cm & dual power outlet design, which can be adapted to most of the models; the internal temperature can be maintained around 36℃, which ease the printing shrinkage of ABS/ASA/PC/PA ; Water and moisture-proof aluminum foil and color-changing silicone desiccant can keep the box dry and prevent the material from absorbing water during the process which reduces the impact of the environment on the printing quality; Thermometer and hygrometer can help to check the date, make the desiccant replacement easier. The box needs no battery with a maintenance-free design. Some materials have a pungent odor, the box can be sealed to isolate the odor, and it comes with a bamboo charcoal bag which can absorb a part of the irritating odor; The flame-retardant aluminum foil is fire-resistant and flame-retardant, which is a guarantee to personal safety; Working printer can create noise, the sealed box design can keep the noise away to provide you a better working environment; It has large inlets with Velcro interface on the top and sides, which is convenient for material access; The large front and overhead observation window have a good light transmission, the printing can be seen at a glance; There is a large tool bag on the side to store the tools. It is easy to disassemble and assemble, and it is convenient to fold and store when not in use.Sellingpoint
Strong compatibility Thermal insulation Waterproof and moisture-proofIsolate the smell Noise reduction
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Technology FDM
Build Volume 180*180*170mm
Printing Speed 500mm/s
Extruder Flow: 30mm³/s
Extruder Temp 300°C
Brass Nozzle
hotend
Connection Options Wi-Fi/USB Flash Drive/Ethernet Cable
Compatible filament PLA, ABS, ASA, PETG, TPU, PET-CF, PA12-CF, PC, UltraPA, Nylon, etc.
Structure CoreXY
Z Axis Double Z axis
X axis Hardened Wear-resistant Carbon Fiber Rod
Firmware: Klipper
Printing Acceleration: 20000mm/s²
Printing Accuracy: ±0.1 mm
Filament diameter: 1.75mm
Bed Leveling: Automatic Leveling
Hot end: Ceramic Heating Core
Extruder: High-flow Direct Drive Extruder
Nozzle diameter: 0.4mm (0.2,0.6 Optional)
Hot bed temperature: 120C
Printing Plate: Double-Sided Flexible Magnetic HF Plate
Filament Detection: Yes
Resonance Compensation Yes
Pressure Advance Yes
Voltage: 100-240VAC, 50/60Hz
Main Processer: Cortex-A53,64-bit Processor 1.5Ghz,8G-EMMC,1G DDR3
Slicer:
QIDI Print and other third-party software,
such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.
Operating System: Windows, MacOS, Linux
Assembled Assembled and First Print within 10 minutes
Warranty 2 years
Add to Wishlist
Add to Wishlist
Technology FDM
Build Volume 280*280*270mm
Printing Speed 600mm/s
Extruder Flow: 35mm³/s
Extruder Temp 350°C
Hotend (Included)
Copper alloy nozzle hotend For Common materials
Hardened steel nozzle hotend For Abrasive materials
Auxiliary Part Cooling Fan Yes
Chamber Temperature Control 65°C Independent Chamber Heating
Chamber Circulation Fan With Activated carbon air filter No
Screen 5.0 inch 480*272 touch screen
Seal print Dryer Box + Desiccant
Connection Options Wi-Fi/USB Flash Drive/Ethernet Cable
Recommended Filament PAHT-CF,PET-CF,PA12-CF
Compatible filament PLA, ABS, ASA, PETG, TPU, PET-CF, PA12-CF, PC, UltraPA, Nylon, etc.
Structure CoreXY
Z Axis Double Z axis
X axis Hardened Wear-resistant Carbon Fiber Rod
Firmware: Klipper
Printing Acceleration: 20000mm/s²
Printing Accuracy: ±0.1 mm
Filament diameter: 1.75mm
Bed Leveling: Automatic Leveling
Extruder transmission ratio 9.5:1
Hot end: Ceramic Heating Core
Extruder: High-flow Direct Drive Extruder
Nozzle diameter: 0.4mm (0.2,0.6,0.8mm Optional)
Hot bed temperature: 120C
Printing Plate: Double-Sided Flexible Magnetic HF Plate
Filament Detection: Yes
Resonance Compensation Yes
Pressure Advance Yes
Voltage: 100-240VAC, 50/60Hz
Main Processer: Cortex-A53,64-bit Processor 1.5Ghz,8G-EMMC,1G DDR3
Slicer:
QIDI Print and other third-party software,
such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.
Operating System: Windows, MacOS, Linux
Assembled Assembled and First Print within 10 minutes
Warranty 2 years
Add to Wishlist
Add to Wishlist
Print size: 325*325*325
Nozzle: 350
Bed: 120
Independent chamber heating temperature: 65
Printing speed: 600mm³/s
Extruder flow: 35mm³/s
Automati Leveling
Dryer Box + Desiccant
Hotend included:
1.Copper alloy nozzle hotend for Common materials
2.Hardened steel nozzle hotend
for Abrasive materials
Filament types: PLA, ABS, ASA, PETG, TPU, PET-CF, PA12-CF, PC, UltraPA, Nylon, etc.
Core XY
Duble Z axis
Printing acceleration: 20000mm/s²
Printing Accuracy: ±0.1 mm
Klipper
Printing acuracy
Printing plate: heated, removable plate
Nozzle diameter: 0.4mm (0.2,0.6,0.8mm Optional)
Add: WIFI, LAN, usb, Cortex-A53,64-bit Processor, 1.5Ghz,8G-EMMC,1G DDR3
Warranty: 2 year
Add to Wishlist
Add to Wishlist
About this item
- 【PETG filament 1.75 - Suitable for High-speed Printing】Compared to ordinary PETG filaments, QIDI TECH PETG-Tough has high fluidity and requires lower extrusion pressure during the printing process, making it ideal for achieving high speed printing, with a printing speed of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Max3 3D printer.
- 【Toughness-enhanced PETG 3D Printer Filament】PETG-Tough has been modified for toughness and its notch impact strength is more than three times that of ordinary PETG. Thus the improved QIDI TECH PETG-Tough 3D printing filament is a rigid, tough, high-performance material with odorless, high impact resistance and high heat resistance.
- 【High Compatiblity & Vacuum Aluminum Foil Pack】QIDI TECH PETG-Tough 3D printing filament is vacuum sealed in a aluminum foil packag to effectively protect the filament from moisture enabling much smoother and more stable printing. Wide compatibility with most 1.75mm Filament FDM Printers on the market.
- 【Dimensional Accuracy & Consistency】QIDI 3D Printers PETG filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PETG-Tough filament through the extruder, coming out more uniform.
- 【Recommend Printing Settings】We recommend printing the PETG-Tough filament at nozzle temperature of 240-280°C, bed temperature of 70-80°C, Fan: 100% and printing speed of 40-400mm/s. Note: Please pass the filament through the fixed hole to avoid tangles after use.
Add to Wishlist
Add to Wishlist
Product categories
Filter by price
Filter by Color
- Black (24)
- Red (6)
- Yellow (7)
- Almond Yellow (1)
- Ash Grey (1)
- Beige (2)
- Blue (7)
- Bone White (1)
- Bronze (1)
- Brown (2)
- Clear (3)
- Cold White (2)
- Cooper (1)
- CYAN (1)
- Dark Blue (1)
- Dark Grey (1)
- Fire Engine Red (3)
- Gold (3)
- Green (8)
- Grey (13)
- Kraft (1)
- Lemon Yellow (1)
- Light Blue (2)
- Light Brown (1)
- Light Khaki (1)
- LIME (1)
- Magenta (1)
- Malt Clay (1)
- Multicolor Rainbow (2)
- Natural (8)
- Navy Blue (1)
- Olive Green (2)
- Orange (5)
- Peach Pink (1)
- Peak Green (1)
- Pine Green (1)
- Pink (2)
- Purple (3)
- Rainbow (2)
- Rose Gold (1)
- Silver (6)
- Sky Blue (1)
- Solid black (1)
- Solid Blue (1)
- Solid Gold (1)
- Solid Green (1)
- Solid Red (1)
- Solid Silver (1)
- Solid White (1)
- Solid Yellow (1)
- Tech Grey (1)
- Transparent Blue (1)
- Transparent Green (1)
- Transparent Orange (1)
- Transparent Pink (1)
- Transparent Purple (1)
- Transparent Red (1)
- Very Peri (1)
- Warm Grey (2)
- Watermelon Red (1)
- White (11)