Filter
Sort:
Show:
QIDI PPS-CF 0,75kg

QIDI PPS-CF 0,75kg

Original price was: 420,00 ₾.Current price is: 390,00 ₾.
Product Features
  • Heat Resistance Up to 264℃
  • Excellent Flame-resistant
  • Top-tier Mechanical Properties
  • Solvent and Chemical Resistance
  • Ultra-Low Water Absorption
Cautions for Use
  • 0.2 mm Nozzle Not Compatible
  • Stainless Steel Nozzle Not Recommended
  • Must Be Dried before Use to Achieve Optimal Print Quality

PPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide (PPS). The combination of PPS resin with carbon fiber imparts excellent properties to PPS-CF, including outstanding solvent resistance, corrosion resistance, heat resistance, and flame retardancy. Additionally, higher printing temperatures enhance the strength, rigidity, and dimensional stability of PPS-CF. When paired with the QIDI Plus4, it becomes a specialty engineering plastic capable of meeting the demands of unique and challenging applications.

PPS-CF exhibits excellent solvent and chemical resistance. At temperatures below 200°C, it is virtually insoluble in any solvent and demonstrates outstanding resistance to acids, alkalis, and salts under normal conditions. This makes PPS-CF an ideal choice for demanding environments where high chemical stability is essential.
Add to cart
Add to Wishlist
Add to Wishlist
ePLA-Matte Dual

ePLA-Matte Dual

Original price was: 90,00 ₾.Current price is: 80,00 ₾.

Description

ePLA-Matte Dual is an excellent printing material that stands out for its matte surface. This material has a unique two-color design, showing a sense of color layering, making the model textured and clear. Its delicate surface and no obvious layer pattern provide a high-level touch and visual quality for the printed parts. Compared with ABS, ePLA-Matte is more convenient to use, the closed cavity is not needed for the printing. It has a lower shrinkage rate,  hard to warping or cracking, making it an ideal choice for printing large-scale models. In addition, the support structure of ePLA-Matte can be removed easily from the surface and leave a smooth and flat surface. It has high strength, and the filament is not easy to break, ensure the continuity and stability of long-term printing without nozzle clogging. These characteristics make ePLA-Matte Dual very suitable for the verification of early concept models and making rapid prototypes.

Sellingpoint

Two-colored filament Environmentally friendly High cost efficient Fast printing
Easy to peel off the support Excellent printability Filament is not easy to break Matte surface
Select options
Add to Wishlist
Add to Wishlist
ePLA-Silk Mystic

ePLA-Silk Mystic

Original price was: 100,00 ₾.Current price is: 90,00 ₾.
Select options
Add to Wishlist
Add to Wishlist
Qidi PLA Rapido Silk/Metal

Qidi PLA Rapido Silk/Metal

90,00 ₾
Select options
Add to Wishlist
Add to Wishlist
ePLA-HS

ePLA-HS

Original price was: 90,00 ₾.Current price is: 70,00 ₾.
By balancing the melt flow index and melt temperature, the ePLA-HS( high speed PLA) can flow smoothly in molten state and cool fast during printing. In this way, it can achieve smooth printing without clogging and fast cooling without deformation during high speed printing.
Add to cart
Add to Wishlist
Add to Wishlist
Qidi ASA

Qidi ASA

Original price was: 120,00 ₾.Current price is: 90,00 ₾.
9 in stock

Description

The excellent weather resistance and mechanical properties make asa filament more resistant to the effects of environmental aging. The asa 3d printer filament is widely used in outdoor applications.

Sellingpoint

Weather resistance High toughness
High rigidity High impact resistance
Select options
Add to Wishlist
Add to Wishlist
Qidi TPU95A-HF

Qidi TPU95A-HF

Original price was: 160,00 ₾.Current price is: 140,00 ₾.
Select options
Add to Wishlist
Add to Wishlist
Qidi UltraPA Nylon Filament (PPA)

Qidi UltraPA Nylon Filament (PPA)

Original price was: 260,00 ₾.Current price is: 220,00 ₾.

Description

Development based on nylon 6/66 copolymer; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance, with an elongation at break of up to 175%, which can print strong and durable parts with high fracture resistance; Low shrinkage, not easy to warp and crack when printing.

Sellingpoint

High toughness High impact resistance
Self-lubricating wear-resisting Excellent printability
Select options
Add to Wishlist
Add to Wishlist
QIDI PAHT 1kg

QIDI PAHT 1kg

Original price was: 360,00 ₾.Current price is: 320,00 ₾.

Description

PAHT-CF(PPA-CF) is specially developed for FDM 3D printing process, the substrate is made of QIDI UltraPA(PPA)，high-temperature nylon with low moisture absorption, high strength, high abrasion resistance, excellent chemical resistance and high heat resistance, good dimensional stability and no warping during the printing process.
Add to cart
Add to Wishlist
Add to Wishlist
eTPE-83A (lastic)

eTPE-83A (lastic)

Original price was: 160,00 ₾.Current price is: 130,00 ₾.

Description

Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.

Sellingpoint

Matte surface effect Skin-friendly feel Flexible and soft Sturdy and durable
High elasticity High tenacity High impact resistance
Select options
Add to Wishlist
Add to Wishlist
eTwinkling

eTwinkling

Original price was: 120,00 ₾.Current price is: 90,00 ₾.

Description

eTwinkling pla filament adds micro-fine glitter powder for a shimmering effect.

Selling point

Special glittering color.
View more about PLA Filament
Easy to print as PLA
Select options
Add to Wishlist
Add to Wishlist
ePLA-Silk

ePLA-Silk

Price range: 80,00 ₾ through 90,00 ₾

Description

The silk pla filament is modified from PLA material, as easy to print as PLA. High toughness is one of pla silk filament's advantages. Metal color silk filament is no harm to user and environment and a good ideal for indoor printing.

Sellingpoint

Shiny and silk luster texture, Smooth surface.
Easy to print as PLA.
High toughness.
Select options
Add to Wishlist
Add to Wishlist
PetG 2,5kg

PetG 2,5kg

Original price was: 180,00 ₾.Current price is: 150,00 ₾.
Select options
Add to Wishlist
Add to Wishlist
Pla+ 3kg & 5kg

Pla+ 3kg & 5kg

Price range: 180,00 ₾ through 300,00 ₾
Select options
Add to Wishlist
Add to Wishlist
PVA+

PVA+

Original price was: 320,00 ₾.Current price is: 240,00 ₾.

Description

PVA+ is a water-soluble material that is often used as a support material with no need of adding any chemical and speicial treating. Leave the part in a warm  water bath dissolve  faster. After dissolution, there is no residue on the model surface with smoothy effect; it can be worked with PLA, TPU, PA(nylon) and other consumables materials to print extremely complex shapes or support materials with a partially closed cavity model. It’s also a good choice to work  for multi-nozzle printers.

Sellingpoint

Water soluble.
Support material.
Add to cart
Add to Wishlist
Add to Wishlist
HIPS

HIPS

Original price was: 100,00 ₾.Current price is: 80,00 ₾.

Description

This dissolvable filament can be used as a 3D printing support material when printing such as ABS, PETG, etc.extremely complex shapes or shapes with partially closed cavities; Hips filament is suitable for multi-nozzle printers.

Sellingpoint

Solubility Support Heat resistance
High toughness High impact resistance
Add to cart
Add to Wishlist
Add to Wishlist

Filter Products

Product categories

Filter by price

Filter by Color

Brands