Misc Archives - Page 2 of 4

View cart “QIDI X-PLUS4” has been added to your cart.

Filter

Showing 17–32 of 54 results

Sort:

Show:

PLA Rapido Metal

80,00 ₾

Product Features

Tough and Durable
No-paint Metallic Texture
No Metal particle infill
Easy to Print & Beginner Friendly

Cautions for Use

Closed chamber not recommend

1. Reduce print speed: PLA Metal is more viscous than regular PLA. Lower print speeds are recommended to minimize pulling and improve surface smoothness. 2. Use proper substrate adhesion: PLA Metal may be more prone to warping in some cases, so make sure that the print bed is clean and that proper adhesion measures are used (PEI sheet or glue, etc.). 3. Do not print too large overhangs: PLA Metal has a higher fluidity at high temperatures, so when printing overhangs, the material does not easily hold its shape in the air. For more details please refer to: Filament Guide on WIKI.

Select options

Add to Wishlist

PLA Wood (Rapido)

80,00 ₾

Product Features

Matte Texture
Wood-like effect
Easy to Print & Beginner Friendly
Diameter: 1.75mm +/- 0.02mm

Cautions for Use

Chamber enclosed not recommend

With the addition of natural wood powder, PLA Wood exhibits the following distinct characteristics compared to regular PLA.

1. Higher Moisture Absorption: PLA Wood contains natural wood powder, making it more sensitive to moisture. Dry before use to ensure the best print quality and consistent finish. •Storage and Drying: Although PLA Wood is thoroughly dried and vacuum-sealed prior to shipping, variations in transport conditions may affect its moisture level. We strongly recommend drying it right after opening and storing it in a sealed container with desiccant. Repeat drying and moisture-proofing before each long-term storage period. •Drying Guidelines: For best results, dry at 55 ± 5°C for 8 hours in a blast drying oven.

2. Color Variation: Natural wood powder may result in slight color variations depending on the drying level and raw material differences.

3.Wood-like smell: During printing, PLA Wood emits a mild, natural wood scent due to the wood powder content. It is non-irritating and non-toxic. For more details please refer to: Filament Guide on WIKI.

Select options

Add to Wishlist

QIDI PPS-CF 0,75kg

390,00 ₾

Product Features

Heat Resistance Up to 264℃
Excellent Flame-resistant
Top-tier Mechanical Properties
Solvent and Chemical Resistance
Ultra-Low Water Absorption

Cautions for Use

0.2 mm Nozzle Not Compatible
Stainless Steel Nozzle Not Recommended
Must Be Dried before Use to Achieve Optimal Print Quality

PPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide (PPS). The combination of PPS resin with carbon fiber imparts excellent properties to PPS-CF, including outstanding solvent resistance, corrosion resistance, heat resistance, and flame retardancy. Additionally, higher printing temperatures enhance the strength, rigidity, and dimensional stability of PPS-CF. When paired with the QIDI Plus4, it becomes a specialty engineering plastic capable of meeting the demands of unique and challenging applications.

PPS-CF exhibits excellent solvent and chemical resistance. At temperatures below 200°C, it is virtually insoluble in any solvent and demonstrates outstanding resistance to acids, alkalis, and salts under normal conditions. This makes PPS-CF an ideal choice for demanding environments where high chemical stability is essential.

Add to cart

Add to Wishlist

ePLA-Matte Dual

80,00 ₾

Description

ePLA-Matte Dual is an excellent printing material that stands out for its matte surface. This material has a unique two-color design, showing a sense of color layering, making the model textured and clear. Its delicate surface and no obvious layer pattern provide a high-level touch and visual quality for the printed parts. Compared with ABS, ePLA-Matte is more convenient to use, the closed cavity is not needed for the printing. It has a lower shrinkage rate, hard to warping or cracking, making it an ideal choice for printing large-scale models. In addition, the support structure of ePLA-Matte can be removed easily from the surface and leave a smooth and flat surface. It has high strength, and the filament is not easy to break, ensure the continuity and stability of long-term printing without nozzle clogging. These characteristics make ePLA-Matte Dual very suitable for the verification of early concept models and making rapid prototypes.

Sellingpoint

Two-colored filament Environmentally friendly High cost efficient Fast printing

Easy to peel off the support Excellent printability Filament is not easy to break Matte surface

Select options

Add to Wishlist

ePLA-Silk Mystic

90,00 ₾

Add to Wishlist

QIDI X-PLUS4

3200,00 ₾

Available on backorder

Add to Wishlist

Qidi PLA Rapido Silk/Metal

90,00 ₾

Add to Wishlist

QIDI Q1 PRO

2200,00 ₾

Add to Wishlist

Qidi ASA

90,00 ₾

10 in stock

Add to Wishlist

Qidi TPU95A-HF

140,00 ₾

Add to Wishlist