View cart “ePLA-LW” has been added to your cart.

Showing 17–28 of 28 results

Sort:

Show:

PVA+

240,00 ₾

Description

PVA+ is a water-soluble material that is often used as a support material with no need of adding any chemical and speicial treating. Leave the part in a warm water bath dissolve faster. After dissolution, there is no residue on the model surface with smoothy effect; it can be worked with PLA, TPU, PA(nylon) and other consumables materials to print extremely complex shapes or support materials with a partially closed cavity model. It’s also a good choice to work for multi-nozzle printers.

Sellingpoint

Water soluble.

Support material.

Add to cart

Add to Wishlist

ePLA-LW

120,00 ₾

Description

Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

Sellingpoint

Density as low as 0.54g/cm³ Foaming volume ratio 220% Free adjustment of strength and foaming ratio Excellent matte surface effect

Good interlayer adhesion Easy to paint Excellent printability

Tips

Notes

1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer and small area printing speed reduction function, the first layer extrusion rate is consistent with the actual foaming extrusion rate, such as 270 degrees set to 45% of the first layer extrusion rate; if the bed adhesion is too strong, you can set the bottom valve when printing. 2. Pay attention to the maximum operating temperature of the printer. Most Teflon tube printers cannot be operated for a long time above 250℃. Long-term printing above this temperature may cause blocking. If the temperature exceeds 250℃, high temperature printers such as metal hoses are required for printing. 3. Yellowing of printed parts after high temperature foaming is a normal phenomenon. Lowering the printing temperature can relieve it. 4. Since the ePLA-LW foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work. Stringing is normal during printing. It is recommended to print the rc plane in vase mode to reduce the effect of stringing. 5. Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, pay attention to compare model design wall thickness according to your own printing situation, adjust extrusion rate, temperature, speed and other parameters.

Add to cart

Add to Wishlist

ePLA Glass

64,00 ₾

Description

When printing with ePLA-Gloss, there will be no irritating smell, which is safe and environmentally friendly; The spool is based on PETG, ABS, PLA and other production wastes and industrial wastes, which are recycled and injected;And the outer box is made of recyclable cartons. eSUN's concept of environmental protection makes 3D printing more sustainable.The ePLA-Gloss are not easy to be brittle, and the printing is smooth for a long time without clogging. This pla filament can be used for early concept models and rapid prototyping.

Sellingpoint

Green and environment-friendly High cost - effective High speed printing The support is easy to remove

Easy to print Hard to break Shinny appearance

Select options

Add to Wishlist

About this item

【PETG filament 1.75 - Suitable for High-speed Printing】Compared to ordinary PETG filaments, QIDI TECH PETG-Tough has high fluidity and requires lower extrusion pressure during the printing process, making it ideal for achieving high speed printing, with a printing speed of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Max3 3D printer.
【Toughness-enhanced PETG 3D Printer Filament】PETG-Tough has been modified for toughness and its notch impact strength is more than three times that of ordinary PETG. Thus the improved QIDI TECH PETG-Tough 3D printing filament is a rigid, tough, high-performance material with odorless, high impact resistance and high heat resistance.
【High Compatiblity & Vacuum Aluminum Foil Pack】QIDI TECH PETG-Tough 3D printing filament is vacuum sealed in a aluminum foil packag to effectively protect the filament from moisture enabling much smoother and more stable printing. Wide compatibility with most 1.75mm Filament FDM Printers on the market.
【Dimensional Accuracy & Consistency】QIDI 3D Printers PETG filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PETG-Tough filament through the extruder, coming out more uniform.
【Recommend Printing Settings】We recommend printing the PETG-Tough filament at nozzle temperature of 240-280°C, bed temperature of 70-80°C, Fan: 100% and printing speed of 40-400mm/s. Note: Please pass the filament through the fixed hole to avoid tangles after use.

Select options

Add to Wishlist

PLA Rapido Matte

72,00 ₾

About this item

【Matte Finish】This newly 3D printing filament outputs prints with smooth and non-glossy colors. Qidi PLA matte filament 1.75 has an incredible matte surface finish that helps hide the layers of your print. It's perfect for creations that require an understated, mysterious appearance.
【PLA Matte filament 1.75 - Suitable for High-speed Printing】PLA Rapido Matte is a new type of pla matte filament newly developed by QIDI TECH. Compared to ordinary PLA filaments, QIDI PLA Rapido matte can be used for high-speed printing, with printing speeds of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Smart3 3D printer.
【Tangle Free & Moisture Free】QIDI TECH PLA Rapido Matte filament 1.75mm is fully mechanically wound and strictly inspected manually, ensuring the line tidy and less-tangle, so as to avoid snap and line breaking. It is dried and vacuum sealed in a package with desiccant.
【Eco-Friendly & Wide Compatibility】Made from starch raw materials derived from renewable plant resources, PLA matte filament boasts lower melting temperature, even does not need a heated bed. Odorless, no pollution and non-toxic during the printing. QIDI TECH PLA Matte Rapido filament is perfectly compatible with most FDM 3D printers on the market that use 1.75mm filament.
【Dimensional Accuracy & Consistency】QIDI TECH 3D Printer PLA Matte filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PLA Rapido Matte filament through the extruder, coming out more uniform.

Select options

Add to Wishlist

PLA Rapido

72,00 ₾

About this item

【PLA filament 1.75 - Suitable for High-speed Printing】PLA Rapido is a new type of pla filament newly developed by QIDI TECH. Compared to ordinary PLA filaments, QIDI PLA Rapido can be used for high-speed printing, with printing speeds of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Smart3 3D printer.
【Tangle Free & Moisture Free】QIDI TECH PLA Rapido filament 1.75mm is fully mechanically wound and strictly inspected manually, ensuring the line tidy and less-tangle, so as to avoid snap and line breaking. It is dried and vacuum sealed in a package with desiccant.
【Eco-Friendly & Wide Compatibility】Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. Odorless, no pollution and non-toxic during the printing. QIDI TECH PLA Rapido filament is perfectly compatible with most FDM 3D printers on the market that use 1.75mm filament.
【Dimensional Accuracy & Consistency】QIDI TECH 3D Printer PLA filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PLA Rapido filament through the extruder, coming out more uniform.
【Recommend Printing Settings】We recommend printing the PLA Rapido filament at nozzle temperature of 220°C, bed temperature of 30-60°C, and printing speed of 200-400mm/s. Note: Please pass the filament through the fixed hole to avoid tangles after use.

Select options

Add to Wishlist

ABS Rapido

65,00 ₾

About this item

【ABS filament 1.75 - Suitable for High-speed Printing】ABS Rapido is a new type of abs filament newly developed by QIDI TECH. It can be applied to high speed printing, with a printing speed of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Plus3 3D printer.
【3D Printer Filament ABS - Strong & Durability】QIDI ABS Rapido 3D filament is a sturdy and durable filament that is more impact resistant than PLA and also suitable for use at higher temperatures. This 3D printing filament ABS is a good choice for functional parts that require durability or high temperature resistance.
【Less Odor & Less Warping & Bubble-Free】This new upgraded QIDI ABS Rapido filament uses low VOC treatment technology to remove small molecules of organic volatiles. Compared to traditional ABS resins, significantly lower volatile content. It has excellent printing quality with minimal odor, no bubble and low warpage during printing.
【Dimensional Accuracy & Consistency】QIDI TECH 3D Printer ABS filament of 1.75mm diameter, Dimensional Accuracy +/- 0.03mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of ABS Rapido filament through the extruder, coming out more uniform.
【Recommend Printing Settings】We recommend printing the ABS Rapido filament at nozzle temperature of 270°C, bed temperature of 80-100°C, and printing speed of 200-400mm/s. Note: Please pass the filament through the fixed hole to avoid tangles after use.

Select options

Add to Wishlist

Description

Sellingpoint

Description

Sellingpoint

Tips

Notes

Description

Sellingpoint

Description

Sellingpoint

Sellingpoint

About this item

About this item

About this item

About this item

Filter Products

Product categories

Filter by price

Filter by Color

Brands

Our Links:

Store Information

+995 555 271 261

Store Location