Engineering Materials Archives

View cart “QIDI PPS-CF 0,75kg” has been added to your cart.

Showing 1–16 of 29 results

Sort:

Show:

QIDI ASA-Aero is a type of lightweight 3D printing filament, specifically developed for the fields of aircraft models, ship models, drones, etc. ASA-Aero controls the foaming ratio of the material by adjusting the nozzle temperature during the printing process so that the density of the material extruded by the nozzle can be adjusted within a certain range. With this technique, it is easy to reduce the weight of the model. In the best-case scenario, the model weight can be reduced to 50% of a model printed with ordinary ASA. In addition to that, the matte texture of the printed surface can reduce the visibility of printed layers and thus give a smooth surface finish.

On-Demand foaming technology QIDI ASA-Aero is a type of ASA filament that will start foaming with the aid of a blowing agent during the printing process. The blowing agent is in an unexcited state in the ASA filament before printing, During the printing process，by adjusting the printing temperature, the foaming ratio of the blowing agent can be easily controlled. The maximum foaming ratio can reach 250%.
Meanwhile, QIDI ASA-Aero retains the original UV aging resistance and high heat resistance of ASA material, which is suitable for long-term use in high-temperature outdoor environments.

Filament Guide(QIDI Wiki) Recommended printing conditions:

Recommended Nozzle Diameter	≥0.4 mm
Print speed	30-90 mm/s
Recommended build surface treatment	PEI Film
Build plate temperature	80-110°C
Raft separation distance	0.18-0.2 mm
Cooling fan speed	0%-50%
Retraction distance	NO
Retraction speed	/
Recommended Support Material	/
Additional Suggestions：
1.Since ASA-Aero adops the ‘on-demand foaming’ technology, the filament will continue to expand in the nozzle after being heated during the printing process. Therefore, it will cause unavoidable stringing during the nozzle movement. Even adjusting the retraction setting in the slicing software cannot solve this problem. Based on the above, it is recommended to turn off the retraction setting.
		2.Because ASA materials have a high glass transition temperature, a certain ambient temperature（40-70°C） is required during printing to release the internal stress of the printed parts and reduce warping. When printing thin-walled models without any form of insulation, it is recommended to use nozzles with a diameter of 0.6mm or more to ensure the strength of printed parts and reduce shrinkage.
			3.When printing with ASA-Aero filaments, please place the enclosed printer in a ventilated environment.

Select options

Add to Wishlist

PA12-CF

290,00 ₾

Add to Wishlist

PET-GF

180,00 ₾

Add to Wishlist

QIDI PPS-CF 0,75kg

390,00 ₾

Product Features

Heat Resistance Up to 264℃
Excellent Flame-resistant
Top-tier Mechanical Properties
Solvent and Chemical Resistance
Ultra-Low Water Absorption

Cautions for Use

0.2 mm Nozzle Not Compatible
Stainless Steel Nozzle Not Recommended
Must Be Dried before Use to Achieve Optimal Print Quality

PPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide (PPS). The combination of PPS resin with carbon fiber imparts excellent properties to PPS-CF, including outstanding solvent resistance, corrosion resistance, heat resistance, and flame retardancy. Additionally, higher printing temperatures enhance the strength, rigidity, and dimensional stability of PPS-CF. When paired with the QIDI Plus4, it becomes a specialty engineering plastic capable of meeting the demands of unique and challenging applications.

PPS-CF exhibits excellent solvent and chemical resistance. At temperatures below 200°C, it is virtually insoluble in any solvent and demonstrates outstanding resistance to acids, alkalis, and salts under normal conditions. This makes PPS-CF an ideal choice for demanding environments where high chemical stability is essential.

Add to cart

Add to Wishlist

Qidi ASA

90,00 ₾

10 in stock

Add to Wishlist

Qidi UltraPA Nylon Filament (PPA)

220,00 ₾

Description

Development based on nylon 6/66 copolymer; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance, with an elongation at break of up to 175%, which can print strong and durable parts with high fracture resistance; Low shrinkage, not easy to warp and crack when printing.

Sellingpoint

High toughness High impact resistance

Self-lubricating wear-resisting Excellent printability

Select options

Add to Wishlist

QIDI PAHT 1kg

320,00 ₾

Add to Wishlist

eTPE-83A (lastic)

130,00 ₾

Add to Wishlist

PetG 2,5kg

150,00 ₾

Add to Wishlist

Pla+ 3kg & 5kg

180,00 ₾ – 300,00 ₾

Add to Wishlist

PVA+

240,00 ₾

Description

PVA+ is a water-soluble material that is often used as a support material with no need of adding any chemical and speicial treating. Leave the part in a warm water bath dissolve faster. After dissolution, there is no residue on the model surface with smoothy effect; it can be worked with PLA, TPU, PA(nylon) and other consumables materials to print extremely complex shapes or support materials with a partially closed cavity model. It’s also a good choice to work for multi-nozzle printers.