Shop - Page 4 of 5 - Into Store

“ePLA-LW” has been added to your cart. View cart

Filter

Showing 49–64 of 79 resultsSorted by latest

Sort:

Show:

ABS-GF25

【ABS Filament Filled Glass Fiber - New upgrade】ABS-GF25 adopts a special multi-layer co-extrusion technology. The inner layer is ABS resin filled with 25% high content of glass fiber, and the outer layer is ABS resin with adhesive strength, which can greatly reduce the floating fiber phenomenon on the surface of the model and make the printed parts feel smoother.
【Excellent Mechanical Properties】QIDI TECH ABS-GF25 filament 1.75mm is a reinforced composite glass fiber ABS material. ABS glass fiber filament is composed of 75% ABS and 25% glass fiber. It has higher hardness and toughness, and reduces shrinkage, which makes it easier to print and obtain frosted surface texture. ABS glass fiber 1.75 is the ideal choice for high-performance applications.
【High Interlayer Bond Strength】On the basis of increasing the content of ABS-GF glass fiber to 25%, a layer of pure ABS resin with high bonding strength is coated on its surface, which retains the original frosting, anti-warping and other characteristics of ABS-GF material, further improves the interlayer bonding performance of the material, and solves the problem that the interlayer strength of ABS-GF filament is weakened.
【High Compatiblity & Vacuum Aluminum Foil Pack】QIDI TECH ABS-GF25 3D printing filament is vacuum sealed in a aluminum foil packag to effectively protect the filament from moisture enabling much smoother and more stable printing. Wide compatibility with most 1.75mm Filament FDM Printers on the market.
【Tips for Printing】Compatible with most of FDM 3D Printers that use 1.75MM filament. Recommend Extrusion / Nozzle Temp: 250°C - 270°C, Bed Temp: 100°C - 110°C, Fan Speed: Off, Print Speed: 40-200mm/s. It is better to use steel nozzle because the hardness of glass fiber is very high and it is easy to wear copper nozzle.

Add to cart

Add to Wishlist

Why choose carbon fiber reinforced PET FDM material?

QIDI TECH PET-CF has been specially designed for the FDM 3D printing process, and its substrate material is technical PET plastic with low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. With good dimensional stability, no warping and no shrinkage and no smell, no heating chambers are required during the printing process.

Intelligent fibre reinforced technology

The intelligent fiber reinforced technology significantly improves the mechanical properties and heat resistance of the material and releases the internal tensions during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no distortion.

Low creep

The molecular chain structure of PET is very regular and has a rigid benzene ring structure, so PET has better mechanical properties and lower deformation under long-term loads. Compared to PA and PC materials, PET has better creep resistance.

High mechanical strength

PET filament carbon fiber has higher strength and rigidity, better impact resistance and wear resistance than normal PETG material. Suitable for applications requiring torsion, tensile and impact resistance.

Low moisture absorption

PET-CF has the characteristics of low moisture absorption, and the moisture absorption of this carbon fibre reinforced PET is only 0.5%. Moisture does not affect the mechanical properties and dimensional stability of PET-CF.

Add to cart

Add to Wishlist

ePLA-Silk metal

Add to Wishlist

Hard-Tough Resin

Add to Wishlist

ePLA-LW

Description

Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

Sellingpoint

Density as low as 0.54g/cm³ Foaming volume ratio 220% Free adjustment of strength and foaming ratio Excellent matte surface effect

Good interlayer adhesion Easy to paint Excellent printability

Tips

Notes

1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer and small area printing speed reduction function, the first layer extrusion rate is consistent with the actual foaming extrusion rate, such as 270 degrees set to 45% of the first layer extrusion rate; if the bed adhesion is too strong, you can set the bottom valve when printing. 2. Pay attention to the maximum operating temperature of the printer. Most Teflon tube printers cannot be operated for a long time above 250℃. Long-term printing above this temperature may cause blocking. If the temperature exceeds 250℃, high temperature printers such as metal hoses are required for printing. 3. Yellowing of printed parts after high temperature foaming is a normal phenomenon. Lowering the printing temperature can relieve it. 4. Since the ePLA-LW foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work. Stringing is normal during printing. It is recommended to print the rc plane in vase mode to reduce the effect of stringing. 5. Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, pay attention to compare model design wall thickness according to your own printing situation, adjust extrusion rate, temperature, speed and other parameters.

Add to cart

Add to Wishlist

ePLA-ST

Add to Wishlist

ePAHT

Description

A material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.

Sellingpoint

High strength High toughness High rigidity High impact resistance Chemical resistance

Heat resistance Abrasion resistance Matte surface effect Excellent printability

Notes

1. ePAHT-CF needs to be dried (70℃/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing. 2. The ePAHT-CF line has strong rigidity and is not easy to bend. In the feeding pipe, excessive bending of the wire should be avoided as much as possible. 3. ePAHT-CF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. If conditions permit, you can choose hardened steel extruder gears. If the printing time is long, you need to replace the throat and nozzles. 4. It is recommended to set the skirt to make it better for taking the model from the forming plate.

Add to cart

Add to Wishlist

ePA-CF

200,00 ₾

Description

With High toughness and impact resistance, eSUN nylon carbon fiber filament is suitable for printing durable parts. Carbon fiber 3d printer filament has high temperature resistance, heat deformation temperature up to 155℃; Low shrinkage, carbon fiber filament is not easy to warp and crack when printing, and the surface of printed models is matte and delicate.

Sellingpoint

Heat resistance High-intensity High rigidity High toughness High impact resistance

Abrasive resistance High dimensional stability Matte surface effect Excellent printability

Add to cart

Add to Wishlist

ePA Nylon

Description

Development based on nylon 6/66 copolymer; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance, with an elongation at break of up to 175%, which can print strong and durable parts with high fracture resistance; Low shrinkage, not easy to warp and crack when printing.

Sellingpoint

High toughness High impact resistance

Self-lubricating wear-resisting Excellent printability

Add to cart

Add to Wishlist

ePLA Glass

Description

When printing with ePLA-Gloss, there will be no irritating smell, which is safe and environmentally friendly; The spool is based on PETG, ABS, PLA and other production wastes and industrial wastes, which are recycled and injected;And the outer box is made of recyclable cartons. eSUN's concept of environmental protection makes 3D printing more sustainable.The ePLA-Gloss are not easy to be brittle, and the printing is smooth for a long time without clogging. This pla filament can be used for early concept models and rapid prototyping.